• Managing the contract, Review & approve EPC contractor’s deliverables, such as drawings, documents, data sheets and specifications. • Review and approve Variance, Concession request, Technical queries. • Generate CTTP- Change to the project for PMT approval. • Ensure client requirements and comments for applicable work package and deliverable are incorporated into the process and instrument design by the EPC contractor. • Ensure contractor deliverables including ICSS system for DCS/ESD/SIS/PLC/F&G/MMS/ SCADA are in compliance with approved FEED documents, Contract documents and company specifications. • Provide PMC / PMT input at EPC contractor led technical and safety design review meetings. • Liaise and interface with other engineering discipline leads and project functions. • Attend HAZOP, Design Review, SIL and 3D model review, Vendor Pre Inspection meetings. • Ensure adherence to project scope criteria as defined in project management plan (including budget / schedule), and bringing to project management attention any project activities impacting upon.

Oct.2013 – Dec 2014: Fluor Canada, Calgary. Senior Instrument Engineer. Client: Chevron / Apache – Kitimat (British Columbia) LNG Project / FEED. Jan 2015 - May 2015: Fluor Canada, Calgary. Senior Instrument Engineer. Client: NAPP-North American Polypropylene Project -Goradia Capital LLC. / FEED. (Licensor: WR Grace, USA.) • Experienced in preparation, reviewing of FEED and detailed engineering deliverables such as Instrument index, ICSS architecture, control room layout, junction box location, IO list, Instrument location drawings, reviewing client specification for project specific addendums. • Review and approve designer prepared Engineering deliverables cable tray, wiring, instrument impulse line drawings, loop drawings, system equipment drawings etc. • Prepare request for quotation (RFQ) / purchase order (PO) packages for field instruments, ICSS systems such as DCS/ESD/SIS/PLC/MMS/F&G/ SCADA and HIPPS system. • Preparation of PDN, NFDC, TBAs & specifications for instruments and ICSS equipment’s. • Update, markup P&ID’s for instrument change, type, adding new instruments based on design review meetings, additional scope etc. Writing scope of work, control narrative, control philosophy & C&E. • Provide inputs for piping isometrics to ensure instrument end connections, upstream and downstream requirements are as per specifications and vendor recommendations. • Attend HAZOP, Design Review, SIL and LOPA, 3D model review meetings, squad check for multidiscipline comments, incorporate HAZOP recommendations. • Reviewing Vendor calculations & drawings. Preparation of data sheets with INtools 7.0. etc. • Provide I&C comments for mechanical vendor package equipment’s. • Provide inputs for safeguarding modules, process shut down keys, process alarm list, alarm and trip settings. Attend FAT, iFAT, SAT for ICSS equipment’s

Client: Nova Chemicals, Red Deer, Canada. / Poly Propylene / Poly Ethylene / Ethylene – EPCM. Multiple Project Group / Sustaining Projects (Brown Field).

(Owners Side). SERP- Syncrude Emission Reduction Project / RFO – Ready for Operation team. FGD -Flue Gas Desulphurization Unit (SO2 Removal). Contractors: Jacobs Engineering-Construction / URS Corporation -EPC / Honeywell-MAC. • Preparation of construction work packages (CWP), reviewing & approving field engineering change advises (FEA), Responsible for monitoring & reporting QC activities during construction; • Identify & document non-compliance; recommend & verify corrective action; routinely monitor EHS aspects; Verify contractor’s physical completion progress; • Prepare & respond to RFI – Request For Information, review & verify contractors “walkdown” /NOR – Notice of readiness submittals. Generating Engineering Change Instructions (ECI). • Prepare punch list & verify for completion, identify punch list priorities. • Review & verify contractors calibration reports & test reports, Supervises commissioning, start-ups tasks. Generate non-compliance, review contractors “turnover binders & submittals”; pre-startup safety review (PSSR). Written SAT procedures and conducted SAT for PLCs. • Liaise with contractor to meet agreed project schedule / handover dates. • Review, prepare commissioning loop check files, review & approve “As-builts”. • Written cold and hot swing over procedure for mechanical equipment’s for DCS revamp project. • Receive equipment, verify functionality, verify as per data sheet, install as per drawings, test all pneumatics for leaks, function test loops, calibrate, continuity check, loop check, put instrument in service, tuning of controllers etc. Engineering Verification for ICSS equipment’s. • Prepared a Inconsistence report based Gate-5 deliverables such as data sheet, P&ID, C&E, Control Narrative, Tag and Alarm list. Ensured EPC contractor to incorporate the inconsistencies. • Having through understanding of Instrument upgrade projects, brown field and green Field projects. • Hands on commissioning experience with various PLCs / DCS.

Automation Engineer– MPG- Multiple Project Group. Client: Imperial Oil alliance projects (Brown Field). Syncrude Canada-Aurora East Pillar Relocation-AEPR-FEED. Shell Canada- Albian Sands Hydrocyclone pilot project- (Detailed Engineering). EnCana- Water Injection (Detailed Engineering) and CO2 Compressor (FEED). SUNCOR –Firebag pipelines (Detailed Engineering) /Canadian Fertilizers Ltd (DBM).

Feb 1993- March 2001: (8 years in Kuwait) /Refinery Maintenance/ Engineering, Construction &Commissioning / Quality engineer ISO 9001:1994 (Brown Field and Green Field). Client: Kuwait National Petroleum Company (KNPC-Refineries-Downstream) / Kuwait Oil Company (KOC-Upstream). Contractor: IMCO / MF Kent. Specific experiences have included: Refinery Restoration Project (RRP) / “Foster Wheeler” (EPCM) / IMCO (Construction contractor) -Mina Al-Abdullah refinery-MAB-KNPC. (Brown Field). Kuwait Oil Company (KOC) / The Pritchard Corporation (EPC Contractor) / IMCO (Construction contractor): Project: Crude oil Control Centre (COCC) & Central Mixing manifolds (CMM), north and east tank forms. KNPC- Mina Ahmadi Refinery (MAA), Maintenance Engineer for FUP Area for WS#1, 2, 3, 4, 5 plants). MAFP Project (MTBE-Alkylation’s-FCC Revamp, Propylene, Spent Acid Regeneration – Work Stataio#6) – Construction and Commissioning with MES Japan EPCM Contractor and Al-Easa Instrument Contractor. KOC / MFKent (EPC and construction contractor) - Replacement of cold flare stacks in to hot applications at six crude gathering centers. (GCs – 3, 6, 7, 8, 19, 22) / EPCM. (Brown Field). KNPC – Mina Al Ahmadi Refinery (MAA) / MFKent (Contractor) Restoration of crude distillation unit-CDU#3. (Brown Field).

Project Managment, Project Management - Construction Management

Instrumentation Engineering, Engineering Instrumentation and Systems